The SNXL9 stand in the 136 × 124 cm variant is the second variant of the stand for the NXL 9-pizza oven in the catalogue. At 136 × 124 × 96 cm, it differs from the first variant (137 × 122 × 96 cm) by 1 cm less in width (136 vs 137 cm) and 2 cm more in depth (124 vs 122 cm). These minimal differences correspond to NXL9 oven variants whose chassis dimensions differ slightly from one sub-model to another. At €540, the same price as the 137 × 122 cm variant, this stand is designed specifically for the NXL9 sub-model with 136 × 124 cm dimensions.
Two SNXL9 variants: what practical difference?
The two SNXL9 stands in the catalogue (137 × 122 × 96 cm and this 136 × 124 × 96 cm model) are the same price (€540) and have dimensions so close it is tempting to consider them interchangeable. They are not: each stand is built to the exact dimensions of the oven it takes, with a plate sized so the oven's feet rest on the stand's load areas and not in overhang.
The 1 cm width difference and 2 cm depth difference may seem negligible, but on an oven as heavy as the NXL9, a 1-2 cm overhang creates a lever arm that amplifies the load asymmetrically on the stand's feet. Over the long term, this asymmetry can deform the stand structure or create a slight unevenness of the oven that affects baking consistency.
To identify which variant matches your NXL9 oven, check the oven base dimensions in its technical sheet or on the rating plate. If the base is 136 × 124 cm, this stand is the right one. If it is 137 × 122 cm, order the other variant. If in doubt, contact us with the full reference of your oven.
9 pizzas at once at 136 cm wide
Like the 137 × 122 cm variant, this stand takes an NXL9 oven with a capacity of 9 pizzas per chamber. The 136 cm width (identical to the double SNXL66 and SNXL99 stands) is the wide format of the NXL range. Plan the layout with 140+ cm of available width and 130+ cm of depth in your kitchen.
The 96 cm height positions the NXL9 sole about 96-100 cm from the floor depending on the chassis thickness. It is the high ergonomic height, suited to operators of 175 cm and over. For an oven as wide (136 cm), height ergonomics is particularly important: loading into the corners of a wide chamber from a too-low or too-high position creates a postural strain on the shoulders.
For which establishment
Pizzeria equipped with the NXL9 oven in the 136 × 124 cm variant — this is the technical stand matching this specific sub-model. If you ordered the NXL9 oven in its "deep" variant (136 × 124 cm base), this stand is the mandatory complement.
Replacing a worn stand on an existing installation — if your NXL9 stand needs replacing and your oven has a 136 × 124 cm base, this stand is the direct replacement. Check your oven reference before ordering so you do not take the 137 × 122 cm variant by mistake.
Technical specifications
| Compatibility | NXL 9-pizza oven — 136 × 124 cm base variant |
|---|
| Dimensions | 136 × 124 × 96 cm (W × D × H) |
|---|
| Material | Stainless steel |
|---|
| Price excl. VAT | €540 |
|---|
What restaurateurs ask
- How to tell this stand (136×124) apart from the 137×122 cm variant?
- The difference is not visible to the naked eye — 1 cm and 2 cm of dimensional difference cannot be seen without measuring. The only reliable way to choose the right stand is to know the exact dimensions of your NXL9 oven's base: measure the base (W × D) with a tape measure or find this data in the oven's technical sheet. If the base is 136 × 124 cm → this stand. If the base is 137 × 122 cm → the other variant. Do not order without having checked.
- Are these two SNXL9 variants the same price?
- Yes — both SNXL9 stand variants are €540 excl. VAT. The price is identical because the manufacturing difference (1-2 cm) does not significantly impact material or manufacturing cost. The SNXL99 stand (double configuration, 18 pizzas) is also €540 — the same price as the single. Your installation's configuration (single or double) determines your order, not a budget criterion between the two singles.
- Can this stand be used as the base of a double NXL9 configuration?
- No — this single stand (one chamber) cannot serve as the base for a double NXL9 configuration. The double NXL99 stand (136 × 124 × 86 cm) differs from this single (136 × 124 × 96 cm) notably in height (86 vs 96 cm) — an essential difference so the double configuration does not reach an excessive height under the hood. For a double configuration, order the SNXL99 directly.
SNXL9 stand, 136 × 124 cm variant, for the NXL 9-pizza oven. Delivery by quote — contact us via the contact form.
MFF Guarantee & After-Sales: 1-year manufacturer guarantee, extended guarantee available. MFF technical support and spare parts. Delivery 48–72h mainland France.
