The SGXL4 stand is the stainless steel base for an XL-format 4-pizza gas pizza oven. At 110 cm wide (versus 100 cm for the standard SPFPG4 gas stand), it is designed to take XL gas ovens whose sole is wider — translating into a more generous baking surface per pizza and a different heat distribution from standard gas ovens. 96 cm height, 96 cm depth. At €450, it is the entry point of the XL gas range, €40 above the standard SPFPG4 stand.
Standard gas vs XL gas: why the oven format changes the stand
The SGXL (XL gas) stand range differs from the SPFPG (standard gas) range by the dimensions of the ovens it supports. XL gas pizza ovens are wider than standard models, with an extended baking sole that allows baking larger-diameter pizzas or positioning the pizzas in the chamber more easily.
SPFPG4 (100 × 85 × 96 cm, €410) — for a standard 4-pizza gas oven. Standard oven width: 100 cm stand. The reduced depth (85 cm) reflects the compact depth of the standard oven.
SGXL4 (110 × 96 × 96 cm, €450) — this product — for an XL 4-pizza gas oven. Width 110 cm and depth 96 cm: the XL oven is wider and deeper than its standard equivalent. These 10 extra cm of width mean a larger baking sole — a 35-40 cm pizza fits more comfortably in an XL chamber than in a standard chamber.
Do not interchange the stands — an XL 4-pizza gas oven cannot rest on an SPFPG4 stand (too narrow). And an SGXL4 stand is not designed for a standard oven that would have a different chassis. The stand-oven match is critical for stability and safety.
110 cm width: what it changes in the kitchen
10 cm more width than the standard stand may seem marginal, but in a professional kitchen, every centimetre counts for fitting into the available space.
Check before installation — measure the available space for your pizza station and check that the SGXL4's 110 cm width fits your configuration. If space is tight and you hesitate between a standard oven (SPFPG4, 100 cm) and an XL oven (SGXL4, 110 cm), note that the gas oven must be your starting point: the stand follows the oven dimensions, not the other way around.
Lateral work space — a 110 cm-wide stand leaves less free lateral space than a 100 cm stand in a kitchen of the same width. If you need a worktop adjacent to the pizza station, factor this width into your layout plan.
Passage in front of the oven — the SGXL4's 96 cm depth is greater than the SPFPG4's (85 cm). If your kitchen has limited available depth for the pizza station, check that 96 cm of the whole (stand + oven against the wall) leaves the regulatory circulation corridor (minimum 80 cm recommended).
For which establishment
Artisan pizzeria with an XL gas oven for large pizzas — you chose an XL gas oven for its large sole surface, which lets you bake 35-40 cm-diameter pizzas without the constraints of a narrower standard oven. The SGXL4 is the natural base for this oven for an artisan-quality pizza service.
Fine-dining restaurant with an XL pizza station — some restaurants integrate a large-format gas pizza oven in their open kitchen or hot line, for custom pizzas and controlled bakes. An SGXL4 stand at 96 cm height fits well into a standard-height cooking line, with the professional look of visible stainless steel from the dining room.
Pizzeria moving upmarket — you are moving from a standard oven to an XL gas oven to broaden your offer (larger pizzas, better sole surface, higher per-pizza capacity oven). The SGXL4 is the base suited to this equipment change.
Technical specifications
| Compatibility | XL gas pizza oven 4 pizzas |
|---|
| Reference | SGXL4 |
|---|
| Dimensions | 110 × 96 × 96 cm (W × D × H) |
|---|
| Material | Stainless steel |
|---|
| Price excl. VAT | €450 |
|---|
What restaurateurs ask
- What is the difference between the SGXL4 and the SPFPG4?
- The SGXL4 (110 × 96 × 96 cm, €450) is designed for XL 4-pizza gas ovens — ovens wider (110 cm) and deeper (96 cm) than standard gas ovens. The SPFPG4 (100 × 85 × 96 cm, €410) is designed for standard 4-pizza gas ovens. These two stands correspond to two different oven lines — the stand must exactly match the oven dimensions. If you have an XL gas oven, choose the SGXL4. If you have a standard gas oven, choose the SPFPG4.
- Can the SGXL4 be used for an XL 6-pizza gas oven if I am short of space?
- No — the SGXL4 is sized for the chassis of an XL 4-pizza oven. An XL 6-pizza oven is deeper (you need the SGXL6 stand, 110 × 132 × 96 cm, €520) or wider depending on the format (SGXL6L, 147 × 96 × 96 cm, €520). Placing a 6-pizza oven on a stand designed for a 4-pizza oven creates a dangerous overhang — do not attempt this substitution.
- Is the SGXL4 suitable for an open kitchen (visible from the dining room)?
- Yes — stainless steel is the material of choice for open kitchens and pizza bars visible from the dining room. Its professional look, natural shine and ease of maintenance make it visually suited to display kitchens. Regular wiping is enough to keep the chrome-like look of the stainless steel visible from the dining room.
SGXL4 stainless steel stand for the XL 4-pizza gas oven. Dimensions 110 × 96 × 96 cm. Standard delivery — contact us for lead times via the contact form.
MFF Guarantee & After-Sales: 1-year manufacturer guarantee, extended guarantee available. MFF technical support and spare parts. Delivery 48–72h mainland France.
