The SSMA44 stand for two stacked Smart range 4-pizza electric pizza ovens is the solution for establishments wanting to double their pizza output without doubling their pizza station's floor footprint. With this 110 cm-wide stand (versus 82 cm for the single SSMA4 stand), two Smart 4-pizza ovens stack vertically on the same floor area — one oven in the low position on the stand, a second oven in the high position via a dedicated stacking kit. The result: 8 pizzas at once (4 per oven) where there were 4, in the same 110 cm-wide corridor.
Stacking: doubling without spreading out
In a catering kitchen, floor space is a scarce resource. When an establishment sees its pizza volume rise and faces queues at the pizza station, the natural solution is to add a second oven. But adding a complete second pizza station (second stand + second oven side by side) needs 82 cm of extra width. In many kitchens, that space is simply not available.
The stacked configuration solves this: you go up in height rather than out in width. The SSMA44 stand (110 × 98 cm) takes the first Smart4 oven on its top platform, exactly like the single SSMA4 stand. A stacking kit installs on this first oven and takes the second Smart4 oven above. The total floor footprint stays 110 × 98 cm — nothing more than the first station. The total height of the assembly rises (stand + 2 ovens), which means enough available height under the hood, but the floor area does not change by a square centimetre.
Note that the SSMA44 stand (€390) does not replace the stacking kit — both accessories are needed for the double configuration. The stand provides the stable base and the right working height for the bottom oven, and the stacking kit handles the attachment and safety of the top oven.
SSMA44 vs SSMA4: a 28 cm difference to double the capacity
The single SSMA4 stand (82 × 98 × 96 cm, €390) and the double SSMA44 stand (110 × 98 × 86 cm, €390) are the same price. The physical difference is the width (82 cm vs 110 cm) and the height (96 cm vs 86 cm). The SSMA44 is wider (to take the bottom oven in a stable double-chamber configuration) and lower (10 cm less) so the total height of the assembly — stand + bottom oven + kit + top oven — stays accessible without reaching impossible heights under a standard hood.
If you start with a single Smart4 oven on an SSMA4 stand and plan to add a second later, it is more economical to order the SSMA44 stand from the start (at the same price) and add the stacking kit and second oven when your volume justifies it. You pay no stand premium and your initial investment is already ready for the step-up.
For which establishment
Growing pizzeria — you started with a single Smart4 oven and your volume exceeds 60-70 pizzas per service. The double configuration (SSMA44 + kit + 2nd Smart4) takes you to 120-140 pizzas per service in the same space, with no kitchen restructuring.
High-throughput pizza dark kitchen — in a pizza-delivery ghost kitchen, every minute of waiting is one fewer customer. Doubling baking capacity in the same space cuts grouped-order prep times.
Restaurant in a seasonal peak period — if your pizza activity varies strongly by season or event, the double configuration lets you absorb peaks with no extra permanent investment in kitchen floor area.
Technical specifications
| Compatibility | Two stacked Smart 4-pizza ovens (+ stacking kit required) |
|---|
| Dimensions | 110 × 98 × 86 cm (W × D × H) |
|---|
| Material | Stainless steel |
|---|
| Total capacity | 8 pizzas at once (4 + 4) |
|---|
| Price excl. VAT | €390 |
|---|
What restaurateurs ask
- Is a stacking kit mandatory with this SSMA44 stand?
- Yes — the SSMA44 stand takes the first Smart4 oven on its plate. To add the second oven above, the Smart stacking kit (sold separately) is essential: it ensures the attachment and holding of the top oven, and cannot be replaced by simple shimming or direct screwing. Without a stacking kit, do not try to stack two ovens — risk of falling and serious accident. Contact us for the reference of the Smart4-compatible stacking kit.
- What is the total height of the stand + 2 ovens assembly?
- The total height depends on the Smart4 oven dimensions (chassis height + stacking kit height). To estimate the total height before buying, contact us with the planned configuration — we give you the assembly's total height and check compatibility with your available height under the hood. A double installation under a too-low hood is a common problem to anticipate before ordering.
- Can two different ovens (e.g. Smart4 + Smart6) be combined on this stand?
- No — the SSMA44 stand and its associated stacking kit are designed for two identical Smart4 ovens. Mixing two oven models of different heights creates a structural imbalance and can be dangerous. For a configuration with a Smart6 below and a Smart4 above (or vice versa), consult us — a stacking kit dedicated to that combination may not exist.
SSMA44 stand for two stacked Smart 4-pizza ovens. Stacking kit and second oven to order separately. Standard delivery — contact us for lead times via the contact form.
MFF Guarantee & After-Sales: 1-year manufacturer guarantee, extended guarantee available. MFF technical support and spare parts. Delivery 48–72h mainland France.
