• On sale!
  • -€99.00

Stand for Gas XL Pizza Oven 6L Wide Format

€421.00 Save €99.00
€520.00
VAT excluded
  • Stainless steel stand · XL gas oven 6 pizzas Wide format — €520
  • Dimensions 147 × 96 × 96 cm — very wide (147 cm), compact in depth (96 cm)
  • Landscape format: 37 cm wider than the SGXL6, 36 cm shallower
  • Ideal for depth-limited kitchens with available width
  • Ergonomic 96 cm height · stainless steel · HACCP
  • Compatible with the XL gas oven 6 pizzas Wide · €520 excl. VAT
Quantity
Pour connaître l'état des stocks, contactez-nous !

The SGXL6L stand is the stainless steel base for an XL 6-pizza Wide-format gas pizza oven. At 147 cm wide for only 96 cm deep, it adopts a landscape orientation radically different from the standard SGXL6 (110 × 132 cm): where the SGXL6 is deeper than wide, the SGXL6L is far wider than deep. Both stands have the same price (€520 excl. VAT) and the same height (96 cm), but they correspond to two XL gas oven models whose sole geometry is fundamentally different. The SGXL6L is the stand for kitchens that have width space but are depth-constrained.

SGXL6 vs SGXL6L: same capacity, opposite geometry

This is the key comparison for this stand — two bases for an XL 6-pizza gas oven, at the same price, with a radically different floor footprint:

SGXL6 (110 × 132 × 96 cm, €520) — portrait format. Width 110 cm, depth 132 cm. The standard XL 6-pizza gas oven has a significant depth (132 cm) with a moderate width (110 cm). It is the classic configuration for kitchens with available depth (at least 135-140 cm against the wall) and moderate width space.

SGXL6L (147 × 96 × 96 cm, €520) — this product — landscape format. Width 147 cm, depth 96 cm. The XL 6-pizza Wide gas oven has a very extended width (147 cm) with a compact depth (96 cm). It is the configuration for kitchens with large available width but limited depth — a U-shaped layout with little clearance, a close rear wall, a service corridor to preserve.

Both ovens have 6 pizzas at once, but their soles have different geometries: the standard SGXL6 has a sole longer in depth, the Wide SGXL6L has a sole wider in width. Before choosing, confirm your oven format (standard or Wide) by checking its technical sheet or sending us its reference.

147 cm wide, 96 cm deep: a very particular landscape footprint

The SGXL6L has the most imbalanced width/depth ratio of the whole SGXL range. Concretely, in your kitchen:

Width 147 cm — the stand occupies 1.47 m in width. That is significant: check that your kitchen has this free width space before ordering. The SGXL6L installs against a long wall or in a central island position if the width is available. In a standard 3 m-wide kitchen, 147 cm of stand leaves 153 cm on each side if the stand is centred — enough for double circulation.

Depth 96 cm — it is the most compact depth of the SGXL 6-pizza range. The standard SGXL6 is 132 cm deep, i.e. 36 cm more. These 36 cm saved in depth can represent the difference between a compliant circulation corridor (80 cm minimum) and a too-narrow passage in a kitchen with clearance constraints.

The landscape configuration frees the service corridor — in an L or U-shaped kitchen where the rear wall is close, the landscape configuration of the SGXL6L maximises the circulation space behind the pizza station. Where a 132 cm-deep SGXL6 would encroach on the corridor, the 96 cm-deep SGXL6L preserves it.

For which establishment

Pizzeria with an L or U-shaped kitchen with limited depth — the L or U configuration often constrains the available depth for the deepest equipment. The SGXL6L with its 96 cm depth fits into these configurations where a standard SGXL6 (132 cm) would create a circulation or safety problem.

Establishment with a long cooking line in width — if your kitchen is laid out in a line along a 4 m+ wall, the SGXL6L integrates naturally into this line. Its 147 cm width takes a significant portion of the line but its 96 cm depth stays consistent with the other line equipment (ranges, fryers, bain-marie) whose standard depth is 90-100 cm.

Dark kitchen optimised for the available surface — in a ghost kitchen where every square metre counts, the SGXL6L's width/depth ratio can optimise surface use versus the standard SGXL6, depending on the premises' geometry.

Pizzeria under renovation with fixed architectural constraints — in some premises, the ventilation, gas connections and hood locations are imposed. A hood positioned lengthwise along a long wall may better match a landscape-format oven — the SGXL6L adapts to these specific installation constraints.

Technical specifications

CompatibilityXL gas pizza oven 6 pizzas Wide format
ReferenceSGXL6L
Dimensions147 × 96 × 96 cm (W × D × H)
MaterialStainless steel
Price excl. VAT€520

What restaurateurs ask

How do I know if my XL 6-pizza gas oven is the standard model (SGXL6) or the Wide format (SGXL6L)?
Refer to the technical sheet or the reference of your oven. The Wide format has a significantly larger sole width than the standard model — generally, the Wide format's sole is 130-140 cm wide (hence the 147 cm stand) versus 95-100 cm for the standard model (hence the 110 cm stand). If you have your oven reference, send it to us and we confirm which stand matches. Do not order the stand before checking — the chassis dimensions are decisive.
Can the SGXL6L stand serve as a base for two small ovens side by side?
No — the SGXL6L is sized for the chassis of a single XL 6-pizza Wide gas oven. Its structure is designed for the specific support points of this oven. Placing two smaller ovens side by side on this stand creates a load distribution different from what is intended — it is not a recommended configuration. For two ovens side by side, each oven must be on its own suitable stand.
Is the SGXL6L more stable than a standard stand despite its 147 cm width?
Yes — a stainless stand's stability is ensured by its tubular structure, not solely by its proportions. The SGXL6L is designed and tested for the load of the XL 6-pizza Wide gas oven with its 147 cm width and 96 cm depth. The structure is sized for these specific loads. Its significant width relative to its depth is precisely what lets the stand match the Wide oven's footprint — the four feet position under the oven's corners for optimal stability.

SGXL6L stainless steel stand for the XL 6-pizza Wide-format gas oven. Dimensions 147 × 96 × 96 cm. Standard delivery — contact us for lead times via the contact form.

MFF Guarantee & After-Sales: 1-year manufacturer guarantee, extended guarantee available. MFF technical support and spare parts. Delivery 48–72h mainland France.

SGXL6L
1 Item
New product

20 other products in the same category: