The 4-castor kit for Smart range pizza oven stands is the mobility accessory designed specifically for the Smart electric range stands (SSMA4, SSMA44, SSMA6, SSMA66). Delivered flat-pack, it fits directly on the existing stand's feet with no permanent modification. At €210, it offers the same usage value as the standard kit for the other ranges (KRFP): turning a fixed stand into a mobile one for cleaning, maintenance and repositioning operations, without replacing the whole structure.
Why a specific kit for the Smart range?
The Smart range stands (SSMA4, SSMA44, SSMA6, SSMA66) have feet of a section and diameter specific to the range. The generic 4-castor kit (KRFP) does not fit these feet — you need the KRSMART kit, whose inner diameter and attachment mechanism match the Smart stands exactly. Using an incompatible kit creates an unstable or impossible attachment, and risks damaging the stand's feet or creating dangerous play during service.
This range-specificity is the rule for all mobility accessories in catering: each oven range has its own stands, and each stand family has its own castors. Always check your stand's reference (SSMA4, SSMA44, SSMA6 or SSMA66) before ordering — if in doubt, contact us with your oven reference and we confirm the right kit.
Delivered flat-pack: a kit to install yourself
Unlike some stands delivered with castors already installed, this kit is delivered flat-pack. It is the format chosen for this Smart range kit: the four castors are packed separately with the fasteners and fitting instructions, which reduces delivery bulk and allows easier storage if installation is not immediate.
Assembly is accessible to any handy operator: attaching the castors to the stand's feet with a flat or adjustable spanner, no drilling or power tools. Allow 20 to 30 minutes for the full installation of the 4 castors. The castors are reversible — if you want to remove them later (change of premises, sale of the stand), removal is as simple as fitting.
Mobility: what it concretely changes in a pizzeria
A fixed pizza oven stand in a catering premises imposes a maintenance constraint. The zone under and behind the oven accumulates flour splashes, topping debris and sauce splatters that fall during preparation and baking. Without stand mobility, this zone is only cleaned with long accessories (brooms, floor squeegees) that reach corners poorly. A strict HACCP check may flag accumulation under fixed equipment as a failure in cleaning traceability.
With the castors fitted, the maintenance protocol is simple: unlock the four castors, move the stand 40 to 60 cm, sweep and wash the floor properly, put the stand back in position, re-lock. Five minutes a week instead of a laborious monthly operation. At the end of service, mobility also lets you push the pizza station to wash the kitchen floor in a single pass, leaving no dead zones under the oven.
For which establishment
This kit suits any pizzeria or restaurant equipped with a Smart range stand for an electric pizza oven (SSMA4 to SSMA66) and wanting to add mobility without changing the stand. It is also the solution for establishments that ordered the fixed stand initially and decide to add castors after installation, without having to resell the stand and buy a new one with integrated castors. The cost of mobility is thus limited to the accessory (€210) rather than to the price difference between a fixed stand and a complete mobile stand.
Technical specifications
| Compatibility | Smart range stands: SSMA4, SSMA44, SSMA6, SSMA66 |
|---|
| Contents | 4 castors with individual brake + fasteners + instructions |
|---|
| Delivery | Flat-pack — self-installation 20-30 min |
|---|
| Fitting | No drilling, no permanent modification |
|---|
| Price excl. VAT | €210 |
|---|
What restaurateurs ask
- What is the difference between the KRSMART kit and the KRFP kit?
- The KRFP kit (€210) is designed for the stands of the standard electric pizza oven ranges (NXL, XLC). The KRSMART kit (€210, this one) is designed for the specific Smart range stands (SSMA4, SSMA44, SSMA6, SSMA66) whose feet have a different diameter and section. Both kits are the same price. The most common mistake is ordering the generic kit for a Smart stand — the attachment does not match. Check your stand's reference before ordering.
- Can the castors be fitted by yourself or do you need a technician?
- Fitting is self-service — no technician required. The castors attach to the stand's feet with a standard flat or adjustable spanner. The fitting instructions are included. Allow 20 to 30 minutes for installing the 4 castors. The operation is reversible: if you want to remove the castors later, removal is done the same way. No permanent modification of the stand is needed.
- Do the castors lock firmly enough for intensive service?
- Yes — each castor has an individual brake mechanism (pedal or lever depending on the model) that immobilises the stand in the service position. In locked mode, the stand is as stable as a fixed stand. It is important to check that all 4 castors are properly locked before each service — especially if the kitchen floor is not perfectly flat or if the oven is subject to vibration. In unlocked mode, the castors swivel 360° to move the stand in all directions.
Set of 4 unassembled castors for a Smart range stand (SSMA4-SSMA66). Standard delivery — contact us for lead times via the contact form.
MFF Guarantee & After-Sales: 1-year manufacturer guarantee, extended guarantee available. MFF technical support and spare parts. Delivery 48–72h mainland France.
